Cleaning Soy Wax K-Bar Bundle

Our Soy Wax K-Wax Bars contain between 8% & 10% fragrance load, giving a consistent & long-lasting scent throw. They come in handy 5 segment snap bars, simply pop one or two segments into your burner.

A wax melt is wax which is combined with a scent, usually using a fragrance oil. It’s similar to what you would find in a scented candle, but it has no wick.

Wax melts a used by warming up the wax using either an electric burner or a tealight burner.

A candle disperses its scent as the wick & wax burns, whilst they can last a long time, the scent throw can vary dramatically.

In comparison, with wax melts the burner will heat the entire portion of the wax melt - throwing the scent but without burning the wax. Eventually the wax will lose its scent and it’s time to change your wax melt for a new one.

In recent times, there has been a shift from people using candles to using wax melts, with many preferring the ease & variety wax melts have to offer.

The level of scent throw can be controlled by the user, very easily. For a stronger & intense scent throw - add more to the well of your burner, but be careful never to over fill. Vice-versa, for a more subtle scent throw, you can reduce the amount of the product you add to the well of your burner.

Our Soy Wax K-Bars come in 5 easy to snap segments, each segment weighs approximately 10 grams.

For an electric burner, snap one or two segments from your K-Bar and place it in the well of the burner. Never overfill the well of your burner. Follow the manufacturers’ instructions to turn on the burner to heat the wax.

For a traditional tealight burner, snap one or two segments from your K-Bar and place it in the well of the burner. Never overfill the well of your burner. Place an unscented 4 hour tealight in the cavity directly below the well, light the tealight.

Remember you can control the level of scent throw by the amount you put in the well.

Then enjoy, as your chosen fragrance fills the room.

To remove used wax, you can either, heat the burner for approximately one minute and it should slide straight out; or heat the wax so it is fully melted & use cotton wool pads to soak up the wax.

Remember, please dispose of used wax responsibly & appropriately.